#Lifeboat medical full
#Lifeboat medical verification

#Lifeboat medical full

In the case of other boats, twice the total mass of the lifeboat when loaded with its full complement of persons and equipment.Ħ.In the case of boats with metal hulls, 1.25 times the total mass of the lifeboat when loaded with its full complement of persons and equipment or.Except for free-fall lifeboats, each lifeboat to be launched by falls shall be of sufficient strength to withstand a load, without residual deflection on removal of that load: A load of 100 kg in any single seat location when a lifeboat to be launched by falls is dropped into the water from a height of at least 3 m Ī load of 100 kg in any single seat location when a free-fall lifeboat is launched from a height of at least 1.3 times its free-fall certification height.ĥ.A static load equivalent to the number of persons each weighing 100 kg for which spaces are provided in compliance with the seating requirements shown in Figure 1.Seating shall be provided on thwarts, benches or fixed chairs which are constructed so as to be capable of supporting: Hulls and rigid covers shall be fire-retardant or non-combustible.Ĥ. Be capable of being launched and towed when the ship is making headway at a speed of 5 knots in calm water.ģ.Enable them to be safely launched into the water when loaded with their full complement of persons and equipment.All lifeboats shall be of sufficient strength to: Total mass fully equipped and fully manned Ģ.Material of hull construction, in such detail as to ensure that compatibility problems in repair should not occur.The certifying organization shall provide the lifeboat with a certificate of approval which, in addition to the above items, specifies: With approval information including the Administration which approved it, and any operational restrictions.Number of persons the lifeboat is approved to carry and.Each lifeboat shall be fitted with a certificate of approval, endorsed by the Administration, containing at least the following items: All lifeboats shall have rigid hulls and shall be capable of maintaining positive stability when in an upright position in calm water and loaded with their full complement of persons and equipment and holed in any one location below the waterline, assuming no loss of buoyancy material and no other damage.ġ. ANNEX III – Technical Details of Sound Signal AppliancesĪll lifeboats shall be properly constructed and shall be of such form and proportions that they have ample stability in a seaway and sufficient freeboard when loaded with their full complement of persons and equipment.ANNEX II – Additional Signals for Fishing Vessels Fishing in Close Proximity.Annex 1 – Positioning and technical details of lights and shapes.

#Lifeboat medical verification

Part F – Verification of compliance with the provisions of the Convention.Rule 35 – Sound signals in restricted visibility.Rule 34 – Manoeuvring and warning signals.Rule 30 – Anchored vessels and vessels aground.Rule 28 – Vessels constrained by their draught.Rule 25 – Sailing vessels underway and vessels under oars.Rule 23 – Power-driven vessels underway.Rule 19 – Conduct of vessels in restricted visibility.Rule 18 – Responsibilities between vessels.